Order Products : sales@su-jiao.com
Generic PC+Polyester - Glass Fiber
| Category: | PC+Polyester , Polycarbonate + Polyester |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KeHnfU_Generic-PC-Polyester---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PC+Polyester - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 - 1.45 | g/cm³ | ASTM D792 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 98.9 - 149 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 121 | °C | |
| Drying Time | 3.5 - 6.0 | hr | |
| Processing (Melt) Temp | 271 - 274 | °C | |
| Mold Temperature | 74.9 - 79.4 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PC+Polyester - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DENYL 66 5010 CB | Vamp Tech | Nylon 66 | DENYL |
| LNP™ STAT-KON™ EX07311P compound | SABIC Innovative Plastics Asia Pacific | PEI | LNP™ STAT-KON™ |
| Plaslube® PA4/6 GF30 TL15 | Techmer Engineered Solutions | Nylon 46 | Plaslube® |
| PLUSTEK PB302G8 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| GELOY™ CR7500 resin | SABIC Innovative Plastics | ASA | GELOY™ |
