Order Products : sales@su-jiao.com

Reon 67-01

Category:	PVC Homopolymer , Polyvinyl Chloride Homopolymer
Manufacturer:	Reliance Industries Limited
Trademark:	Reon
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KFuiTS_Reon-67-01.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Reon 67-01 is a medium molecular weight suspension type PVC resin suitable for rigid extrusion products. It is specially recommended for rigid pipes & conduits, rigid profiles, rigid sheets, unplasticised tubular film etc. Its combination of medium molecular weight with high apparent bulk density makes it suitable for easy processing at high output rate, still maintaining the high mechanical properties. Its balanced heat loss property does not allow static to develop and reduces the flow time. At the same time the resin contains minimum volatiles. The narrow range of porosity of Reon 67-01 makes it easy to maintain a uniform fusion point at constant lubricant level. Uniform coarseness of the grains of this resin results in easy bulk handling, minimum requirement of lubricant and more uniform fluxing in the extruder.

Message

Reon 67-01 is a medium molecular weight suspension type PVC resin suitable for rigid extrusion products. It is specially recommended for rigid pipes & conduits, rigid profiles, rigid sheets, unplasticised tubular film etc. Its combination of medium molecular weight with high apparent bulk density makes it suitable for easy processing at high output rate, still maintaining the high mechanical properties. Its balanced heat loss property does not allow static to develop and reduces the flow time. At the same time the resin contains minimum volatiles. The narrow range of porosity of Reon 67-01 makes it easy to maintain a uniform fusion point at constant lubricant level. Uniform coarseness of the grains of this resin results in easy bulk handling, minimum requirement of lubricant and more uniform fluxing in the extruder.

General Information
Features	Good Processability Homopolymer Medium Molecular Weight
Uses	Conduit Film Piping Profiles Sheet
Agency Ratings	IS 10151
Appearance	Clear/Transparent
Processing Method	Blown Film Calendering Extrusion

Physical	Nominal Value	Unit	Test Method
Apparent Density	0.55	g/cm³	ASTM D1895
K-Value ¹	67.0
Inherent Viscosity	0.92		ASTM D1243
Particle Size Distribution			ASTM D1921
Retention on ASTM 40 mesh	< 0.10	%
Retention on ASTM 60 mesh	< 5.0	%
Through ASTM 140 mesh	< 25	%

Thermal	Nominal Value	Unit	Test Method
Heat Loss	< 0.30	%	ASTM D3030

Additional Information	Nominal Value	Unit	Test Method
Dark Resin - for 100 g resin	< 10.0	count/g
Flow Time	< 25.0	sec	ASTM D1895
Porosity - DOP	0.210 to 0.290	cm³/g	ASTM D3367
Residual Vinyl Chloride Monomer	< 2	ppm	ASTM D3749

Note Message
1 .	@ 1% in cyclohexanone

Resin Grade	Manufacturer	Category	Trademark
MALEX 01EFR002 - 2324	AD majoris	PC	MALEX
Rulon® 641	Saint Gobain Performance Plastics	PTFE	Rulon®
Sylvin 9917-89 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
CELEX™ 5200HF.K	Trinseo	PC+ABS	CELEX™
Hanwha Total PP BI392	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, Unspecified	Hanwha Total PP