Honeywell PMP R1500

Category:	PMP , Polymethylpentene
Manufacturer:	Honeywell
Trademark:	Honeywell PMP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Iq4NS7_Honeywell-PMP-R1500.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Honeywell R-Series PMP film is made from polymethylpentene. It provides more toughness and heat resistance than standard polyolefins for release film applications. R-Series Film is available in the following colors: Blue and Clear.

General Information
Features	Heat resistance, medium Good toughness
Uses	release film
Appearance	Blue Clear/transparent
Forms	Films

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.908	g/cm³	ASTM D792

Mechanical	Nominal Value	Test Method
Coefficient of Friction		ASTM D1894
With Metal-Dynamic	0.55	ASTM D1894
With self-dynamics	1.0	ASTM D1894

Films	Nominal Value	Unit	Test Method
secant modulus			ASTM D882
MD	665	MPa	ASTM D882
TD	707	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield	36.9	MPa	ASTM D882
TD : Fracture	30.3	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Fracture	250	%	ASTM D882
TD : Fracture	350	%	ASTM D882
Water Vapor Transmission	60	g/m²/24 hr	ASTM E96

Additional Information
Yield: 20339 in²/lbTensile Strength @ Yield, ASTM D 882, MD: 4000 to 6500 psiTensile Strength @ Break, ASTM D 882, TD: 3800 to 5000 psiElongation @ Break, ASTM 882, MD: 200 to 300%Elongation @ Break, ASTM 882, TD: 400 to 500%Secant Modulus, ASTM D 882, MD: 83000 to 110000 psiSecant Modulus, ASTM D 882, TD: 90000 to 115000 psiGraves Tear (initial), ASTM D 1004, MD: 275 to 325 g/milGraves Tear (initial), ASTM D 1004, TD: 250 to 300 g/milDimensional Stability, ASTM D1204, TD, 300°F, 10 min: <2% shrinkageDimensional Stability, ASTM D1204, MD, 300°F, 10 min: <1.5% shrinkageCoef of Friction, ASTM D1894, Vs Metal - Dynamic: 0.4 to 0.7Coef of Friction, ASTM D1894, Vs Itself - Dynamic: 0.8 to 1.2

Additional Information

Yield: 20339 in²/lbTensile Strength @ Yield, ASTM D 882, MD: 4000 to 6500 psiTensile Strength @ Break, ASTM D 882, TD: 3800 to 5000 psiElongation @ Break, ASTM 882, MD: 200 to 300%Elongation @ Break, ASTM 882, TD: 400 to 500%Secant Modulus, ASTM D 882, MD: 83000 to 110000 psiSecant Modulus, ASTM D 882, TD: 90000 to 115000 psiGraves Tear (initial), ASTM D 1004, MD: 275 to 325 g/milGraves Tear (initial), ASTM D 1004, TD: 250 to 300 g/milDimensional Stability, ASTM D1204, TD, 300°F, 10 min: <2% shrinkageDimensional Stability, ASTM D1204, MD, 300°F, 10 min: <1.5% shrinkageCoef of Friction, ASTM D1894, Vs Metal - Dynamic: 0.4 to 0.7Coef of Friction, ASTM D1894, Vs Itself - Dynamic: 0.8 to 1.2

Resin Grade	Manufacturer	Category	Trademark
Sinpolene MBW0722	Teknor Apex Asia Pacific PTE. LTD.	PE, Unspecified	Sinpolene
TEREZ PA 6.6 7500 TF 20 GF 30	TER HELL PLASTIC GMBH	Nylon 66	TEREZ PA 6.6
UBESTA 3030LUX	UBE Industries, Ltd.	Nylon 12	UBESTA
Adiprene® LF 950A	Chemtura	PUR-Ether/TDI	Adiprene®
Pujie CPE-132C	Zhanhua Pujie Chemical Technology Co.,Ltd	CPE	Pujie