Order Products : sales@su-jiao.com
Infino SC-1100UR
| Category: | PC , Polycarbonate |
| Manufacturer: | LOTTE ADVANCED MATERIALS CO., LTD. |
| Trademark: | Infino |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | I2Wwbe_InfinoSC1100UR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Infino SC-1100UR is a polycarbonate (PC) product,. It is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity (Natural) | 1.20 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 12 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage | |||
| Flow : 3.20mm | 0.50 - 0.70 | % | ASTM D955 |
| Transverse flow : 3.20mm | 0.50 - 0.70 | % | ASTM D955 |
| Lateral flow : 3.20mm | 0.50 - 0.70 | % | ISO 2577 |
| Traffic : 3.20mm | 0.50 - 0.70 | % | ISO 2577 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| Class r | 120 | ASTM D785 | |
| R scale | 120 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 2000 | MPa | ASTM D638 |
| -- | 1800 | MPa | ISO 527-2/5 |
| Tensile Strength | |||
| Yield 2 | 63.0 | MPa | ASTM D638 |
| Yield | 64.0 | MPa | ISO 527-2/5 |
| Fracture 3 | 64.0 | MPa | ASTM D638 |
| Fracture | 65.0 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Fracture 4 | 110 | % | ASTM D638 |
| Fracture | 6.0 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| -- 5 | 2300 | MPa | ASTM D790 |
| -- 6 | 2300 | MPa | ISO 178 |
| Flexural Strength | |||
| -- 7 | 90.0 | MPa | ASTM D790 |
| -- 8 | 91.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 9(23°C) | 80 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact | |||
| 23°C, 3.18 mm | 850 | J/m | ASTM D256 |
| 23°C, 6.35 mm | 150 | J/m | ASTM D256 |
| 23°C 10 | 85 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, unannealed, 6.40mm | 140 | °C | ASTM D648 |
| 0.45 MPa, unannealed, 4.00mm | 135 | °C | ISO 75-2/B |
| 1.8 MPa, unannealed, 6.40mm | 135 | °C | ASTM D648 |
| 1.8 MPa, not annealed, 4.00mm | 125 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 145 | °C | ISO 306/B50 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.8 to 3.0mm) | V-2 | UL 94 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Refractive Index | 1.586 | ASTM D542 | |
| Haze (3200 µm) | < 0.80 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 120 | °C | |
| Hot air dryer | 110 | °C | |
| Drying Time | |||
| -- | 2.0 - 6.0 | hr | |
| Hot air dryer | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Rear Temperature | 220 - 230 | °C | |
| Middle Temperature | 240 - 280 | °C | |
| Front Temperature | 260 - 270 | °C | |
| Nozzle Temperature | 290 | °C | |
| Mold Temperature | 80 - 120 | °C | |
| Injection Pressure | 49.0 - 245 | MPa | |
| Back Pressure | 0.490 - 1.96 | MPa | |
| Screw Speed | 50 - 150 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 50 mm/min |
| 5 . | 2.8 mm/min |
| 6 . | 2.0 mm/min |
| 7 . | 2.8 mm/min |
| 8 . | 2.0 mm/min |
| 9 . | Thickness: 4mm |
| 10 . | Thickness: 4mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOTAL Polyethylene HDPE 5502 (EU) | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| Cevian®-V 110 | PlastxWorld Inc. | ABS | Cevian®-V |
| Europrene® N 3380 GRN | Versalis S.p.A. | NBR | Europrene® |
| Plaslube® ABS 8006 | Techmer Engineered Solutions | ABS | Plaslube® |
| Marlex® 9332 | Chevron Phillips Chemical Company LLC | HDPE, HMW | Marlex® |
