Order Products : sales@su-jiao.com

Bynel® 41E865

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	DuPont Packaging & Industrial Polymers
Trademark:	Bynel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HwymDr_Bynel-41E865.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

BYNEL® Series 4100 series resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All BYNEL Series 4100 series resins are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins.

BYNEL 4100 series resins adhere to a variety of materials. They are most often used to adhere to EVOH, polyamide, PE and ethylene copolymers.

BYNEL 41E865 is also known for its ability to adhere to PS (polystyrene) in the coextrusion process.
Series 4100 resins can be used in coextrusion processes including:

blown film

cast film/sheet

blow molding

melt and solid phase thermoforming

sheet and tubing

LLDPE resins are known for their temperature resistance and toughness. These physical properties make the 4100 series resins work well in applications such as:

boil-in-bag structures

blow molded containers in which drop strength is important

bag-in-box films

film where LLDPE is the heat seal layer.

General Information
Features	Good adhesion
Uses	Films Blow molding applications Pipe fittings cast film Sheet Adhesive
Agency Ratings	FDA 21 CFR 175.105
Forms	Particle
Processing Method	Solid Phase Press. Form. Thermoforming Blow film Blow molding Co-extrusion molding cast film Sheet extrusion molding Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.940	g/cm³	ASTM D792, ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.7	g/10 min	ASTM D1238, ISO 1133

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	82.0	°C	ASTM D1525, ISO 306
Peak Melting Temperature	109	°C	ASTM D3418, ISO 3146
Freezing Point	106	°C	ASTM D3418

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	160	°C
Cylinder Zone 2 Temp.	185	°C
Cylinder Zone 3 Temp.	235	°C
Cylinder Zone 4 Temp.	235	°C
Cylinder Zone 5 Temp.	235	°C
Adapter Temperature	235	°C
Melt Temperature	< 250	°C
Die Temperature	235	°C

Extrusion instructions
Processing conditions shown are for coextrusion with EVOH.Processing conditions for coextrusion with nylon:Zone 1: 160°CZone 2: 185°CZone 3: 235°CZone 4: 250°CZone 5: 250°CAdapter: 250°CDie: 250°C

Resin Grade	Manufacturer	Category	Trademark
PRESEAL® TPE 5020	Premix Oy	TPE	PRESEAL®
RTP 800 TFE 15 Z	RTP Company	Acetal (POM) Copolymer	RTP
Wondel® S GR0	Nanjing Julong Engineering Plastics Co., LTD	ABS	Wondel® S
Fainplast PVC PH 83	Fainplast Compounds S.r.l	PVC, Flexible	Fainplast PVC
Forprene® 6NE001A65	SO.F.TER. SPA	TPV	Forprene®