Order Products : sales@su-jiao.com
Milastomer™ 5030BS
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Mitsui Chemicals America, Inc. |
| Trademark: | Milastomer™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H6GoIo_Milastomer-5030BS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Milastomer™5030BS is a thermoplastic vulcanized rubber (TPV) material,. This product is available in North America and is processed by injection molding. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/10.0 kg) | 20 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ISO 48 | ||
| Shaw A | 54 | ISO 48 | |
| Shaw A, 5 seconds | 48 | ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 1.20 | MPa | ISO 37 |
| Tensile Stress 2(Break) | 3.30 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 460 | % | ISO 37 |
| Compression Set | ISO 815 | ||
| 23°C, 22 hr | 27 | % | ISO 815 |
| 70°C, 22 hr | 44 | % | ISO 815 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | Internal method |
| Additional Information |
|---|
| All tests performed according to Mitsui methods. |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 3100-10 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| WPP PP JOSB26624 | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| Exact™ 9061 | ExxonMobil Chemical | Plastomer | Exact™ |
| KOPA® KN333G33BL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| Polimid A 25 GF V0A TR1 | Poliblend S.p.a. | Nylon 66 | Polimid A |
