Order Products : sales@su-jiao.com
Infino HF-3200H
| Category: | PC , Polycarbonate |
| Manufacturer: | SAMSUNG SDI CO., LTD. |
| Trademark: | Infino |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GxGCac_Infino-HF-3200H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Infino HF-3200H is a Polycarbonate (PC) product filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (250°C/10.0 kg) | 11 | g/10 min | ASTM D1238, ISO 1133 |
| Ash Content | 19 | % | ISO 3451 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 118 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 4800 | MPa | ASTM D638 |
| -- | 5100 | MPa | ISO 527-2/50 |
| Tensile Strength | |||
| Yield 2 | 78.0 | MPa | ASTM D638 |
| Yield | 110 | MPa | ISO 527-2/50 |
| Break 3 | 110 | MPa | ASTM D638 |
| Break | 115 | MPa | ISO 527-2/50 |
| Tensile Elongation | |||
| Break 4 | 4.3 | % | ASTM D638 |
| Break | 3.7 | % | ISO 527-2/50 |
| Flexural Modulus | |||
| -- 5 | 4600 | MPa | ASTM D790 |
| -- 6 | 5800 | MPa | ISO 178 |
| Flexural Strength | |||
| -- 7 | 120 | MPa | ASTM D790 |
| -- 8 | 170 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 9(23°C) | 14 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact | |||
| 23°C, 3.18 mm | 140 | J/m | ASTM D256 |
| 23°C 10 | 12 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 6.40 mm | 145 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 4.00 mm | 146 | °C | ISO 75-2/B |
| 0.45 MPa, Annealed | 146 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed, 6.40 mm | 140 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 4.00 mm | 142 | °C | ISO 75-2/A |
| 1.8 MPa, Annealed, 4.00 mm | 142 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 150 | °C | ISO 306/B50 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-2 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 120 | °C | |
| Desiccant Dryer | 110 | °C | |
| Drying Time | |||
| -- | 4.0 to 6.0 | hr | |
| Desiccant Dryer | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Rear Temperature | 250 to 260 | °C | |
| Middle Temperature | 260 to 270 | °C | |
| Front Temperature | 280 to 285 | °C | |
| Nozzle Temperature | 285 | °C | |
| Mold Temperature | 70.0 to 100 | °C | |
| Injection Pressure | 68.6 to 226 | MPa | |
| Back Pressure | 0.490 to 1.96 | MPa | |
| Screw Speed | 50 to 150 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 50 mm/min |
| 5 . | 2.8 mm/min |
| 6 . | 2.0 mm/min |
| 7 . | 2.8 mm/min |
| 8 . | 2.0 mm/min |
| 9 . | Thickness: 4 mm |
| 10 . | Thickness: 4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| polyvic® E-1208-IL T | Unipack Plasindo | PVC, Flexible | polyvic® |
| Thermoset Plastics 281 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| Verolloy A2706 | PlastxWorld Inc. | ABS+Nylon | Verolloy |
| ELASTOSIL® AUX BATCH PT 1 | Wacker Chemie AG | Silicone | ELASTOSIL® AUX |
| POLYasa 2008F | Polykemi AB | ASA | POLYasa |
