Order Products : sales@su-jiao.com

Marlex® HXB TR-512

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GrQzTU_Marlex-HXB-TR-512.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Marlex® HXB TR-512 is a High Density (HMW) Polyethylene material. It is available in Latin America or North America for blow molding or extrusion.

Important attributes of Marlex® HXB TR-512 are:

Chemical Resistant

Creep Resistant

Eco-Friendly/Green

Food Contact Acceptable

Hexene Comonomer

Typical applications include:

Containers

Food Contact Applications

Tanks

General Information
Features	Durable Food Contact Acceptable Good Chemical Resistance Good Creep Resistance Good Impact Resistance Hexene Comonomer High ESCR (Stress Crack Resist.) Med.-Wide Molecular Weight Distrib. Recyclable Material Ultra High Molecular Weight
Uses	Drums Industrial Tanks
Agency Ratings	ASTM D 4976-PE235 FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Blow Molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.954	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	5.5	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)	> 1000	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Compression Molded)	60		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	29.0	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	800	%	ASTM D638
Flexural Modulus - Tangent ³(Compression Molded)	1340	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength ⁴(Compression Molded)	450	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded)	74.0	°C	ASTM D648
Brittleness Temperature	< -75.0	°C	ASTM D746A
Vicat Softening Temperature	126	°C	ASTM D1525 ⁵

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min
3 .	13 mm/min
4 .	Type S
5 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Stanyl® ForTii™ F11C	DSM Engineering Plastics	Nylon 4T	Stanyl® ForTii™
TUFNYL® SGF 10 Black	SRF Ltd.	Nylon 6	TUFNYL®
ELASTOSIL® M 4470	Wacker Chemie AG	Silicone	ELASTOSIL® M
Infino VB-5150GL	SAMSUNG SDI CO., LTD.	PBT	Infino
Kynar Flex® 2850-00	Arkema	PVDF	Kynar Flex®