Order Products : sales@su-jiao.com
Dapol® D2100F
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Fudow Co., Ltd. |
| Trademark: | Dapol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GgEEhf_DapolD2100F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Examples of application
|
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.90 - 1.95 | g/cm³ | JIS K6911 |
| Molding Shrinkage | JIS K6911 | ||
| -- 1 | 0.60 - 0.90 | % | JIS K6911 |
| -- 2 | 0.40 - 0.60 | % | JIS K6911 |
| Water absorption rate- boiling | 0.15 - 0.25 | % | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 230 - 250 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | JIS K6911 | ||
| after boiling | 1.0E+13 - 1.0E+14 | ohms | JIS K6911 |
| at ordinary state | 1.0E+14 - 1.0E+15 | ohms | JIS K6911 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Shrinkage | 0.050 - 0.15 | % | JIS K6918 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress | JIS K6911 | ||
| Molding | 78.0 - 108 | MPa | JIS K6911 |
| Injection Molding | 118 - 137 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | JIS K6911 | ||
| Molding | 3.9 - 5.9 | kJ/m² | JIS K6911 |
| Injection Molding | 4.9 - 6.9 | kJ/m² | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 11 - 14 | kV/mm | JIS K6911 |
| Dielectric Constant | 5.00 - 5.50 | JIS K6911 | |
| Dissipation Factor | 0.015 - 0.020 | JIS K6911 | |
| Arc Resistance | > 180 | sec | JIS K6911 |
| Comparative Tracking Index | > 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.79 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| 2 . | Compression Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PP/PE PP/PE Alloy | Shandong Dongchen Engineering Plastics Co., Ltd. | PP+PE | Shandong PP/PE |
| Boda BDF601P | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| Elastron® G G100.A60.N | Elastron USA, Inc. | SEBS | Elastron® G |
| PLUSTEK PA350M4 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| Panlite® K-1285ZH | TEIJIN LIMITED | PC | Panlite® |
