Order Products : sales@su-jiao.com
Andur 8200 AP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gagx7r_Andur-8200-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8200-AP is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 82 to 84 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 2000 | cP | ASTM D2393 |
| 100°C | 400 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 3.8 to 4.2%Specific Gravity, ASTM D792, 77°F: 1.09 g/mlSpecific Gravity, ASTM D792, 212°F: 1.045 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULATEC® PEEK WR 30 NV 12 | A. Schulman Europe | PEEK | SCHULATEC® |
| AKROMID® B3 GM 10/20 1 L black (4646) | AKRO-PLASTIC GmbH | Nylon 6+PP | AKROMID® |
| CP PRYME® Nylon 6 N100LZ NAT | Chase Plastics Services Inc. | Nylon 6 | CP PRYME® Nylon 6 |
| Dryflex® CS 60A001N | ELASTO | SEBS | Dryflex® |
| Techsil® RTV27909 | Techsil Limited | Silicone Rubber, RTV-2 | Techsil® |
