Order Products : sales@su-jiao.com
Grilamid® 2S XE 10901 nat
| Category: | Nylon 612 , Polyamide 612 |
| Manufacturer: | EMS-GRIVORY |
| Trademark: | Grilamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GSqdzE_Grilamid2SXE10901nat.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grilamid®2S XE 10901 nat is a polyamide 612 (nylon 6/12) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is extrusion or injection molding. Grilamid®The main features of 2S XE 10901 nat are:
Typical application areas include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.01 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Transverse flow | 1.6 | -- | % | ISO 294-4 |
| Flow | 1.0 | -- | % | ISO 294-4 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 1.3 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.60 | -- | % | ISO 62 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Ball Indentation Hardness | 40.0 | 25.0 | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 700 | 350 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 25.0 | 20.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 50 | > 50 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 100 | 110 | kJ/m² | ISO 179/1eA |
| 23°C | 110 kJ/m² | No Break | ISO 179/1eA | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | No Break | ISO 179/1eU | |
| 23°C | No Break | No Break | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 50.0 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 40.0 | -- | °C | ISO 75-2/A |
| Continuous Use Temperature | ||||
| -- 1 | 90.0 - 100 | -- | °C | ISO 2578 |
| -- 2 | 150 | -- | °C | Internal method |
| Melting Temperature 3 | 220 | -- | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow | 1.7E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral | 1.7E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+11 | 1.0E+11 | ohms·cm | IEC 60093 |
| Dielectric Strength | 38 | 38 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | -- | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification (0.8 mm) | HB | -- | IEC 60695-11-10, -20 |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Type | PA610+X - GHL, 18-007 | -- | ISO 1874 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| 3 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMOFIN PPC364I6 | Polyram Ram-On Industries | PP Copolymer | RAMOFIN |
| SABIC® LLDPE 218B | Saudi Basic Industries Corporation (SABIC) | LLDPE | SABIC® LLDPE |
| Shin-Etsu Elastomer KE-2090-30A/B | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| NEOPLAST 243 HOFR | Zylog Plastalloys | TPV | NEOPLAST |
| ACLAM® TC100 (6 mil) | Honeywell | Polyolefin, Unspecified | ACLAM® |
