Order Products : sales@su-jiao.com
KW Plastics KWR102CA10
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0DVwxh_KW-Plastics-KWR102CA10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Copolymer Impact Polypropylene Post-Consumer Resin Compounded with 10% Calcium Carbonate CHARACTERISTICS Increased stiffness, faster processing, improved heat deflection, lower cost. Available as mixed color and pre-colored black. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.00 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 0.39 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 13 | % | ASTM D638 |
| Flexural Modulus | 1110 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 41.9 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILPURAN® AUX 8250 RO | Wacker Chemie AG | Silicone | SILPURAN® |
| AT 191A | Celanese EVA Performance Polymers | LDPE | AT |
| Gallonprene® GP210-5502L | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Orgalloy® RS 6635A | Arkema | Nylon 66 Alloy | Orgalloy® |
| Elastoprene HS5060A NAT | KMI Group, Inc. | TPE | Elastoprene |
