Order Products : sales@su-jiao.com
ADMER™ NF358E Anti-Fog
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GIyIo0_ADMER-NF358E-Anti-Fog.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® NF358E is a maleic anhydride grafted, LDPE-based tie resin developed for multilayer film applications composed of PE, PA, EVOH or Aluminum. The superior adhesion performance and high transparency makes it the perfect choice for multilayer barrier films, especially in antifogging applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.6 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 44 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 8.00 | MPa | |
| Break | 15.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 82.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE B6246 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| ADENE NCZB | A.D. Compound spa | PP Homopolymer | ADENE |
| Pebax® 5533 SP 01 | Arkema | PEBA-Ether | Pebax® |
| PENTAMID A GV25 MC25 H natural | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
| PETILEN MH 318 | PETKIM Petrokimya Holding A.S. | PP, Unspecified | PETILEN |
