Order Products : sales@su-jiao.com
CERTENE™ PBM-37
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G3FqNR_CERTENE-PBM-37.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBM-37 is a certified prime grade impact copolymer designed for injection molding of applications requiring optimal balance of stiffness and impact resistance. PBM-37 offers improved processability, high melt flow for easy filling multicavity and intricate mold geometry, fast cycling , and very good dimensional stability. PBM-37 applications include automotive interior trim, thin-walled parts, toys, overcaps, closures and household goods. PBM-37 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1 + 3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 37 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(R-Scale) | 87 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Injection Molded) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 55 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 1100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 93.3 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LLDPE MG500026 | Saudi Basic Industries Corporation (SABIC) | LLDPE | SABIC® LLDPE |
| Extir® EH 3000 | Versalis S.p.A. | PS (EPS) | Extir® |
| Dynaflex™ G2703-1000-00 | PolyOne Corporation | TPE | Dynaflex™ |
| Generic PUR-Ester/MDI | Generic | PUR-Ester/MDI | Generic |
| Isocor™ SC45BT | Shakespeare Monofilaments and Specialty Polymers | Nylon 610 | Isocor™ |
