Order Products : sales@su-jiao.com
SQUARE® LIM1500-40A/B
| Category: | Silicone Rubber, LSR , Silicone Rubber, LSR |
| Manufacturer: | Shenzhen SQUARE Silicone Co., Ltd. |
| Trademark: | SQUARE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FqyvG0_SQUARELIM150040AB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Liquid silicone rubber material for indoor medium and high voltage resistance terminal Product Description 2-part liquid silicone rubber, which is suitable for injection or extrusion molding with tracking resistance 1A 3.5 grade, mixing ration of parts A:B=1:1, with standing middle and high voltage, catalyzed by platinum .The appearance of A is transparent and B is grey. Key Features
At the temperature of 20 and in the condition of air-proof,the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature. Applications Medium and high voltage resistant cable accessories, indoor cold shrink and terminal, tie-in and jacket etc suitable for injection and extrusion molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 9.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 800 | % | ASTM D412 |
| Tear Strength 1 | 30.0 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 1.0 | ||
| Component B | Mixing ratio by weight: 1.0 | ||
| Pot Life (20°C) | 7200 | min | |
| Shelf Life | 52 | wk | |
| Post Cure Time (200°C) | 4.0 | hr |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 2 | Clear/Transparent | ||
| -- 3 | Grey | ||
| Solids Content | 100 | % | |
| Viscosity | 950 | Pa·s | |
| Curing Time (140°C) | 0.17 | hr |
| Note Message | |
|---|---|
| 1 . | B mould |
| 2 . | Part A |
| 3 . | Part B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Novodur® H702 | Styrolution | ABS | Novodur® |
| NOVALAC RX®620 | Vyncolit N.V. | Phenolic | NOVALAC |
| ALTECH® PA6 A 2025/109 GF25 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Hapflex™ 580-3 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| Sylvin 7844-90C Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
