Order Products : sales@su-jiao.com
Thermoset Plastics 340 No.67
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F1oDq0_Thermoset-Plastics-340-No-67.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics 340 No.67 is an Epoxy; Epoxide (Epoxy) material filled with filler. It is available in North America for casting or encapsulating. Important attributes of Thermoset Plastics 340 No.67 are:
Typical application of Thermoset Plastics 340 No.67: Wire & Cable |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.16 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.080 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 50.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 2.7 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 13 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 5.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 4.40 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.031 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 6.0 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 70000 | cP | ASTM D2393 |
| Demold Time (100°C) | 120 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3880H | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| THERMOLAST® K TF8WCS (Series: DW/CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Torayca® XTLP1040 | Toray Resin Company | Nylon 6 | Torayca® |
| Witcom PA6 EC-HI | Witcom Engineering Plastics B.V. | Nylon 6 | Witcom PA6 |
| Polifor® L30 GF/30 NATURALE | SO.F.TER. SPA | PP Homopolymer | Polifor® |
