Order Products : sales@su-jiao.com

Silopren® LSR 4040

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Silopren®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	F1I5Zl_Silopren-LSR-4040.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Silopren LSR 4040 is a two-component liquid silicone rubber for injection moulding processes. Silopren LSR 4040 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.

Key Features and Benefits
Vulcanisates consisting of Silopren LSR 4040 are distinguished by the following properties:

Excellent biocompatibility

High stability to ozone and ultraviolet light

Neutral odor and taste

Sterilisable with ethylene oxide, steam and gamma radiation

Good transparency

High thermal stability

High recovery after puncture

Easy pigmentable with the LSR Colour Pastes

Potential Applications
Because of the outstanding properties Silopren LSR 4040 is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters, parts for medical technical equipment, mats s.o.

General Information
Features	Biocompatible Ethylene Oxide Sterilizable Good Colorability Good Thermal Stability Good UV Resistance High Clarity Low to No Odor Low to No Taste Ozone Resistant Radiation Sterilizable Steam Sterilizable
Uses	Connectors Diaphragms Medical/Healthcare Applications Seals
Agency Ratings	BfR Food Contact, Unspecified Rating FDA 21 CFR 177.2600 ISO 10993 USP Class VI
Appearance	Clear/Transparent
Forms	Liquid
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.12	g/cm³	DIN 53479

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	40		DIN 53505

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	9.00	MPa	DIN 53504
Tensile Elongation (Break)	750	%	DIN 53504
Tear Strength ¹	25.0	kN/m	ASTM D624
Compression Set (175°C, 22 hr)	25	%	DIN 53517

Thermoset	Nominal Value	Unit	Test Method
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0
Post Cure Time (200°C)	4.0	hr

Additional Information	Nominal Value	Unit	Test Method
Vulcanization (175°C)	10.0	min

Uncured Properties	Nominal Value	Unit	Test Method
Color
-- ²	Translucent
-- ³	Translucent
Viscosity			DIN 53018
20°C ⁴	600	Pa·s
20°C ⁵	600	Pa·s
Pot Life (20°C)	4300	min

Note Message
1 .	Die B
2 .	Part B
3 .	Part A
4 .	Part B
5 .	Part A

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene GC43P250-00	RheTech, Inc.	PP Copolymer	RheTech Polypropylene
Trithene® TS 7045	Petroquimica Triunfo	LDPE	Trithene®
Hifax CA 1132 A	LyondellBasell Industries	TPO (POE)	Hifax
INEOS LDPE 23H430	INEOS Olefins & Polymers Europe	LDPE	INEOS LDPE
ICORENE® 4035	ICO Polymers EMEA, A Division of A. Schulman	PP Impact Copolymer	ICORENE®