Order Products : sales@su-jiao.com
apinat® DP2165
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | API SpA |
| Trademark: | apinat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EugQlB_apinat-DP2165.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| apinat®DP2165 is a biodegradable polymer (Biodeg Polymers) product,. It is available in Europe. The main features are: environmental protection/green. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 48 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 23.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 650 | % | ASTM D638 |
| Flexural Modulus | 240 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 114 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 130 - 140 | °C | |
| Middle Temperature | 140 - 150 | °C | |
| Front Temperature | 150 - 160 | °C | |
| Nozzle Temperature | 160 - 180 | °C | |
| Mold Temperature | 25.0 - 40.0 | °C | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Injection Pressure: MediumBack Pressure: Medium/Low |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 130 - 140 | °C | |
| Cylinder Zone 2 Temp. | 140 - 150 | °C | |
| Cylinder Zone 3 Temp. | 150 - 160 | °C | |
| Cylinder Zone 4 Temp. | 160 - 180 | °C | |
| Cylinder Zone 5 Temp. | 150 - 170 | °C |
| Extrusion instructions |
|---|
| L/D ratio: 24:1Compression Screw Ratio: 2.3:1Screw Speed: 50 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| T-Blend® 0092N-NE | TSRC Corporation | SEBS | T-Blend® |
| apilon 52bio® DB 40/AP | API SpA | TPU-Polyester | apilon 52bio® |
| KRATON® G7705 GI-B | Kraton Polymers LLC | SEBS | KRATON® |
| Petrothene® LRTR436 | LyondellBasell Industries | HDPE | Petrothene® |
| Elastollan® 1264 D 13 U 000 | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
