Order Products : sales@su-jiao.com
Geon™ 130 Series 137
| Category: | PVC Copolymer , Polyvinyl Chloride Copolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ 130 Series |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ErHyMG_Geon-130-Series-137.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon® 137 is a carboxyl functional copolymer dispersion resin providing extra adhesion to synthetic fabrics, such as nylon, allowing the elimination of adhesion promoters. It provides the ability to crosslink with epoxies, providing a more solvent resistant coating. The polarity of Geon® 137 allows its use in hydrosols. Geon® 137 is recommended for applications where special characteristics are requires, such as nylon fabric coating, hydrosol inks and coatings, solvent resistant coatings, and automotive sealants. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific gravity- Calculated value | 1.40 | ||
| Intrinsic Viscosity | 1.1 | ASTM D1243-60-A | |
| Humidity- Karl Fisher 1 | 0.12 | % | Internal method |
| Volume density | 400 | g/l | |
| Relative Viscosity 2 | 2.55 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Optimal stretch- FF 3 | 14.8 | MPa | ASTM D638 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss- 60 degree fused 5 mins @ 350F 4 | 55 | % | Internal method |
| Transparency-light transmittance 5 | 78 | % | Internal method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brokfield Viscosity | Internal method | ||
| Initial Viscosity @ 2 rpm 6 | 16.3 | Pa·s | Internal method |
| Initial Viscosity @ 20 rpm 7 | 27.0 | Pa·s | Internal method |
| One Day Viscosity @ 2 rpm 8 | 17.9 | Pa·s | Internal method |
| One Day Viscosity @ 20 rpm 9 | 32.3 | Pa·s | Internal method |
| Cut off the outflow- 95 psi 10 | 12.00 | g/10 min | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fixed Acid 11 | 2.4 | % | Internal method |
| Free Acid 12 | 0.40 | % | Internal method |
| North fineness 13 | 3.00 | Hegman | Internal method |
| Residual Vinyl Chloride Monomer 14 | ppm | Internal method | |
| Methanol extractable 15 | 3.1 | % | Internal method |
| polymerization process | Microsuspension | ||
| Gel temperature 16 | 67 | °C | Internal method |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| K-Value 17 | 73.0 | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® ALTC and ASTM D638 (formulation): 100phr Geon® 137, 77phr DINP, 3phr ESO, and 2phr Therm-Chek SP 120 LOHFGeon® STP 390(formulation): 100phr Geon® 137, and 60phr DOP |
| Note Message | |
|---|---|
| 1 . | Karl Fisher-Geon® 683c |
| 2 . | Interrelationship |
| 3 . | With provided formulation |
| 4 . | 60°，FF，ALTC-65 |
| 5 . | FF，ATLC-66 |
| 6 . | Initial, V12,Geon®1010 |
| 7 . | One day, V12,Geon®1010 |
| 8 . | Geon® ALTC 22 (with provided formulation) |
| 9 . | Geon® ALTC 22 (with provided formulation) |
| 10 . | 95 psi，Geon® 1010 |
| 11 . | Geon® STP 1315 |
| 12 . | Geon® STP 1315 |
| 13 . | Geon® 390 |
| 14 . | Geon® STP 1005 |
| 15 . | Geon® 894 |
| 16 . | FF，ALTC-29 |
| 17 . | Interrelationship |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® LSH 16001 | Plastic Solutions, Inc. | LLDPE | PrimaFlex® |
| VICTREX® PEEK 150G | Victrex plc | PEEK | VICTREX® PEEK |
| DINALON® PA 6 IGNÍFUGA 30% FV | Grupo Repol | Nylon 6 | DINALON® |
| Rotuba CAB B9004 (7% Plasticizer) | Rotuba Extruders, Inc. | CAB | Rotuba CAB |
| OTECH TPE OTO9097 - Profile | OTECH Corporation | TPE | OTECH TPE |
