Order Products : sales@su-jiao.com
EL-Pro™ P500J
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | SCG Chemicals Co., Ltd. |
| Trademark: | EL-Pro™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EhK0Dg_EL-Pro-P500J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EL-Pro P500J is a high flowability polypropylene homo polymer. This grade is designed for compounding and injection moulding with excellent thermal stability. It is suitablefor electical appliance compounding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 85 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength - Across Flow 1 | ASTM D638 | ||
| Yield | 36.3 | MPa | ASTM D638 |
| Fracture | 26.5 | MPa | ASTM D638 |
| Flexural Modulus | 1620 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 20 | J/m | ASTM D256 |
| 0°C | 20 | J/m | ASTM D256 |
| 23°C | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 102 | °C | ASTM D648 |
| Vicat Softening Temperature | 150 | °C | ASTM D1525 |
| Melting Temperature | 163 | °C | ASTM D2117 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | 51 | ASTM D2457 | |
| Haze | 82 | % | ASTM D1003 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal-oxidative Deterioration (150°C) | > 15.0 | day | TPE |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 230 - 270 | °C | |
| Mold Temperature | 25.0 - 70.0 | °C | |
| Injection Rate | Fast | ||
| Screw Speed | 40 - 70 | rpm |
| Injection instructions |
|---|
| Pressure: Injection 40-80%Packing and holding: 30 to 60%Back 10% |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TF3BNA (Series: FC/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| TOTAL Polyethylene HDPE 9260 | TOTAL Refining & Chemicals | HDPE, MMW | TOTAL Polyethylene |
| KOPET® KP133G45 | Kolon Plastics, Inc. | PET | KOPET® |
| Keliren® CM302 | Hangzhou Keli Chemical Co., Ltd. | CPE | Keliren® |
| Dow Corning® C6-550 | Dow Corning Corporation | Silicone | Dow Corning® |
