Order Products : sales@su-jiao.com
DOW™ HDPE DMDC-1210 NT 7
| Category: | HDPE , High Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E2HSx2_DOW-HDPE-DMDC-1210-NT-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW™ DMDC-1210 NT 7 High Density Polyethylene Resin is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Typical applications include injection molded closures for water bottles, where minimizing the contribution of the package to the taste of the product is a requirement. Main Characteristics:
Complies with:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.952 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 10% Igepal, F50 | 12.0 | hr | ASTM D1693 |
| 50°C, 100% Igepal, F50 | 22.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 27.3 | MPa | ASTM D638 |
| Fracture | 20.5 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 13 | % | ASTM D638 |
| Fracture | 1500 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 1050 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 130 | °C | Internal method |
| Additional Information |
|---|
| Plaque molded and tested in accordance with ASTM D 4976. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2200 HF TFE 15 | RTP Company | PEEK | RTP |
| Queo™ 8230 | Borealis AG | Plastomer | Queo™ |
| TAROPRENE® 1 A55 E1N | Taro Plast S.p.A. | TPV | TAROPRENE® |
| Nycal™ 2050R33H | Technical Polymers, LLC | Nylon 612 | Nycal™ |
| Pinnacle PP 1120 H | Pinnacle Polymers | PP Homopolymer | Pinnacle PP |
