Order Products : sales@su-jiao.com
Elastamax™ XL-2165
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Elastamax™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DTKl9H_Elastamax-XL-2165.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PolyOne's Elastamax™ XL thermoplastic olefins (TPOs) are based on pelletized blends of polyolefin resins and select elastomers such EPDM. These materials have been engineered to provide a balance of physical properties and processability, and are an economical alternative to traditional thermoset rubber and more costly thermoplastic elastomers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 68 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 9.24 | MPa | ASTM D412A |
| Tensile Strength 2(Break) | 11.1 | MPa | ASTM D412A |
| Tensile Elongation 3(Break) | 250 | % | ASTM D412A |
| Tear Strength 4 | 33.3 | kN/m | ASTM D624 |
| Compression Set (23°C, 22 hr) | 43 | % | ASTM D395B |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (3.18 mm) | 14 | kV/mm | ASTM D149 |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 510 mm/min |
| 4 . | Die C, 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sevrene® 3582-70A | Vi-Chem Corporation | TPE | Sevrene® |
| Sylvin 8250-85 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| UNITIKA Nylon 6 A1030JR | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| Plaslube® J-1/30/TF/22 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| ALTECH® PP-H B 4910/500 MR10 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
