Order Products : sales@su-jiao.com
Westlake LDPE EP413
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uG3XqL_Westlake-LDPE-EP413.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE polyethylene EP413 is a low-density polyethylene recommended for blown or cast film clarity applications. This material has very good optical properties, and is suggested for bakery films, produce bags, and general purpose clarity applications. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 3.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD | 186 | MPa | |
| 1% Secant, TD | 207 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break | 26.2 | MPa | |
| TD : Break | 17.2 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 490 | % | |
| TD : Break | 700 | % | |
| Dart Drop Impact | 100 | g | ASTM D1709 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 80 | ASTM D2457 | |
| Haze | 4.0 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 182 to 199 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LDPE 2102X3 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| SCANAMID 66 A13^ F30 | Polykemi AB | Nylon 66 | SCANAMID 66 |
| Sindustris ABS LXR510E | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Baoding 68T98 | Baoding Bangtai Polymeric New-Materials Co.,Ltd | TPU-Polyester | Baoding |
| LEXAN™ LUX9132C resin | SABIC Innovative Plastics | PC | LEXAN™ |
