Order Products : sales@su-jiao.com

SCLAIR® 99L

Category:	HDPE , High Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	SCLAIR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	DGGBDm_SCLAIR-99L.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

SCLAIR®99L is a high density polyethylene material,. This product is available in North America,.

SCLAIR®The main features of 99L are:

High stiffness

high strength

Good processability

processing aids

Homopolymer

Typical application areas include:

bag/lining

Movie

food contact applications

General Information
Additive	Processing stabilizer Processing aid
Features	Low speed solidification crystal point Rigidity, high High density High strength Homopolymer Workability, good Good stretchability Compliance of Food Exposure
Uses	Films Heavy packing bag
Agency Ratings	FDA 21 CFR 177.1520(c) 2.2

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.962	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.55	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	69		ASTM D2240

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	38	µm
secant modulus			ASTM D882
1% secant, MD : 38 µm, blown film	830	MPa	ASTM D882
1% secant, TD : 38 µm, blown film	1330	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield, 38 µm, blown film	27.0	MPa	ASTM D882
TD : Yield, 38 µm, blown film	22.0	MPa	ASTM D882
MD : Broken, 38 µm, blown film	39.0	MPa	ASTM D882
TD : Broken, 38 µm, blown film	22.0	MPa	ASTM D882

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	128	°C	ASTM D1525

Optical	Nominal Value	Unit	Test Method
Gloss (45°, 38.0 µm, Blown Film)	5		ASTM D2457
Haze (38.0 µm, Blown Film)	78	%	ASTM D1003

Extrusion instructions
Blow-up Ratio: 2.5:1 to 4:1

Resin Grade	Manufacturer	Category	Trademark
Ablefilm 570	Henkel Ablestik	Epoxy	Ablefilm
Arnite® TV4 260 S	DSM Engineering Plastics	PBT	Arnite®
CERTENE™ HI-960U	Muehlstein	HDPE	CERTENE™
HiFill® PA6/6 1550 GF40	Techmer Engineered Solutions	Nylon 66	HiFill®
INEOS PP H01H-00	INEOS Olefins & Polymers USA	PP Homopolymer	INEOS PP