Order Products : sales@su-jiao.com
Ravathane R130D55
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | RAVAGO Kimya Plastik Sanayi ve Ticaret A.S. |
| Trademark: | Ravathane |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D8vr7C_Ravathane-R130D55.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: Product is based on standard grade saturated polyester and has strong resilience and tear resistance, excellent abrasion resistance, higher resistance to hydrolysis failure and oxidation, good stability towards solvents and light. Application: Wheel, shoes, injection part etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.23 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 55 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Resistance | 35.0 | mm³ | ISO 4649 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% Strain | 18.0 | MPa | |
| 300% Strain | 35.0 | MPa | |
| Tensile Stress (Yield) | 44.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 400 | % | ISO 37 |
| Tear Strength 1 | 180 | kN/m | ISO 34-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Rear Temperature | 200 | °C | |
| Middle Temperature | 210 | °C | |
| Front Temperature | 215 | °C | |
| Nozzle Temperature | 220 | °C | |
| Injection Pressure | 70.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RONFALIN® ST65 | A. Schulman Europe | ABS | RONFALIN® |
| ARBOFORM® L, V3 natur | TECNARO GmbH | CA | ARBOFORM® |
| Fainplast PVC PM 6510 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Plaslube® PA6/6 GF13 TL10 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| Plyophen 23010 | Durez Corporation | Phenolic | Plyophen |
