Order Products : sales@su-jiao.com
Premier HD30H18
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gwMB7F_Premier-HD30H18.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier HD30H58 is a high density polyethylene resin suitable for stiff cast/blown film applications. Also can be used in an LLDPE blend. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.45 | g/10 min | |
| 190°C/21.6 kg | 30 | g/10 min |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| MD | 1100 | MPa | |
| TD | 1380 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 34.5 | MPa | |
| TD : Yield | 13.8 | MPa | |
| MD : Break | 82.7 | MPa | |
| TD : Break | 37.9 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 420 | % | |
| TD : Break | 5.0 | % | |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 10 | g | |
| TD | 800 | g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 281 MS | RTP Company | Nylon 66 | RTP |
| SCANAMID 6 B11^ F45 | Polykemi AB | Nylon 6 | SCANAMID 6 |
| GPPC PS-333 | GPPC Chemical Co., Ltd. | PS (HIPS) | GPPC |
| EPLAMID 6 GFR UV 50 BK | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 6 | EPLAMID 6 |
| ISPLEN® PM 270 XT | REPSOL | PP Homopolymer | ISPLEN® |
