Order Products : sales@su-jiao.com
CONATHANE® EN-4020
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONATHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CyXGfp_CONATHANE-EN-4020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CONATHANE EN-4020 is a filled, flame retardant urethane system formulated for casting high-voltage transformers and other electrical/electronic devices used in demanding outdoor applications. CONATHANE EN-4020 has been tested by Underwriters Laboratories and is recognized to UL 94V-0. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.24 | g/cm³ | |
| -- 2 | 1.64 | g/cm³ | |
| Water Absorption (25°C, 24 hr) | 0.28 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 to 70 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 19.7 | MPa | |
| Tensile Elongation (Break) | 50 | % | |
| Tear Strength | 61.3 | kN/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 1.7E-4 | cm/cm/°C | |
| Thermal Conductivity | 1.8 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 4.3E+15 | ohms | |
| Volume Resistivity (25°C) | 7.4E+14 | ohms·cm | |
| Dielectric Strength (1.59 mm) | 20 | kV/mm | |
| Dielectric Constant (25°C, 1 kHz) | 5.13 | ||
| Dissipation Factor (25°C, 1 kHz) | 0.057 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (9.53 mm) | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 16 | ||
| Thermoset Mix Viscosity (40°C) | 2200 | cP |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Linear Shrinkage | 0.72 | % |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Hardener |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Yanshan PE 3000J/JE | SINOPEC Beijing Yanshan Petrochemical | HDPE | Yanshan PE |
| XYRON™ 100Z | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
| Delrin® SC652 NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Eltex® PF6160AP | INEOS Olefins & Polymers Europe | LLDPE | Eltex® |
| LNP™ LUBRICOMP™ FP003 compound | SABIC Innovative Plastics Europe | PE, Unspecified | LNP™ LUBRICOMP™ |
