Order Products : sales@su-jiao.com

Dryflex® V 75A101

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	ELASTO
Trademark:	Dryflex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CP8axO_DryflexV75A101.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Dryflex V Thermoplastic Vulcanisate (TPV) compounds are high performance materials designed for demanding applications where improved durability, heat or fluid resistance are required.

General Information
Features	Low compressive deformability Recyclable materials Workability, good Good adhesion Good chemical resistance Fatigue resistance Good weather resistance acid resistance Oil resistance
Uses	Large household appliances and small household appliances Electrical/Electronic Applications Electrical appliances Building materials Architectural application field Parts under the hood of a car Application in Automobile Field Car interior parts Automotive exterior parts Consumer goods application field
Appearance	Black Available colors Natural color
Processing Method	Blow molding Extrusion Thermoforming Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.960	g/cm³	ISO 2781

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	75		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	3.00	MPa	ISO 37
Tensile Stress (Yield)	7.00	MPa	ISO 37
Tensile Elongation (Break)	490	%	ISO 37
Tear Strength ¹	26	kN/m	ISO 34-1
Compression Set ²			ISO 815
23°C, 24 hr	27	%	ISO 815
70°C, 24 hr	39	%	ISO 815
100°C, 24 hr	48	%	ISO 815

Injection	Nominal Value	Unit
Drying Temperature	80	°C
Drying Time	3.0	hr
Rear Temperature	160 - 190	°C
Middle Temperature	170 - 200	°C
Front Temperature	180 - 210	°C
Nozzle Temperature	190 - 220	°C
Mold Temperature	15 - 50	°C
Injection Rate	Moderate-Fast

Extrusion	Nominal Value	Unit
Drying Temperature	80	°C
Drying Time	3.0	hr
Cylinder Zone 1 Temp.	160 - 190	°C
Cylinder Zone 2 Temp.	170 - 200	°C
Cylinder Zone 3 Temp.	180 - 200	°C
Cylinder Zone 4 Temp.	180 - 210	°C
Die Temperature	190 - 220	°C

Note Message
1 .	C method: crescent sample
2 .	Type a

Resin Grade	Manufacturer	Category	Trademark
S&E Wire & Cable GA-1046-80E	S&E Specialty Polymers, LLC	PVC, Semi-Rigid	S&E Wire & Cable
Victron® 095C6	Asia International Enterprise (Hong Kong) Limited	PEEK	Victron®
CONTINUUM™ DMDC-1270 NT 7	The Dow Chemical Company	HDPE	CONTINUUM™
LONGLITE® PBT 3015-200X	CCP Group	PBT	LONGLITE® PBT
ALFATER XL® A90E 2GP0000	ALBIS PLASTIC GmbH	TPV	ALFATER XL®