Order Products : sales@su-jiao.com
EcoHumer BFX303
| Category: | PLA , Polylactic Acid |
| Manufacturer: | WooSung Chemical Co., Ltd. |
| Trademark: | EcoHumer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9vp4Ci_EcoHumerBFX303.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BFX303 is biodegradable compound for blown film. The Base material of BFX303 is PLA(Polylactic Acid). The film made by BFX303 will be stiff in comparison with PBAT-based film, and it will have good modulusin maintaining the shape. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 - 1.26 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 - 40 | g/10 min | ASTM D1238 |
| Water content- 105°C/10min | ppm | Internal method |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Seal Strength 1(30.0 µm) | 10 | N | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear strength- 1mm notch 2(30.0 µm) | 87.2 | kN/m | Internal method |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength - MD (yield, 30 µm, blown film) | 37.6 | MPa | Internal method |
| Tensile Elongation - MD (Broken, 30 µm, blown film) | 290 | % | Internal method |
| Note Message | |
|---|---|
| 1 . | Blown Film |
| 2 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NYCOA Polyamide 2277 | Nycoa (Nylon Corporation of America) | Nylon Copolymer | NYCOA Polyamide |
| Epic Epoxy 0161 | Epic Resins | Epoxy | Epic Epoxy |
| Hanwha Total PP GH41 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| IDI STC 2147 | IDI Composites International | Vinyl Ester | IDI STC |
| LNP™ LUBRILOY™ D2000AXH compound | SABIC Innovative Plastics | PC | LNP™ LUBRILOY™ |
