Order Products : sales@su-jiao.com

Jampilen HP421H

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Jam Polypropylene Company
Trademark:	Jampilen
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	900tq3_Jampilen-HP421H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Jampilen HP421H is a modified homopolymer designed for the very high speed production of coextruded BOPP films. The product is used for the core of the coextruded film structure with a low seal temperature resin (Jampilen terpolymers) in the outside layers. Jampilen HP421H allows an outstanding extrusion stability and thickness variation control, especially on cascade lines, very high drawability and readiness to a two way orientation. The product contains a reinforced processing stabilization and a package of slip and antistatic agents but does not bear any antiblocking agents.
BOPP films produced with Jampilen HP421H feature good mechanical properties, even at low temperatures, excellent barrier against moisture, odours, oils, fats and oxygen and high transparency, high gloss and good printability after corona treatment.

General Information
Additive	Antistatic Processing Aid Slip
Features	Antistatic Barrier Resin Excellent Printability Fast Molding Cycle Flavor & Aroma Barrier Good Drawdown Good Processing Stability High Clarity High Gloss High Impact Resistance Homopolymer Low Temperature Heat Sealability Moisture Barrier Oil Resistant Oxygen Barrier Puncture Resistant Slip
Uses	Bi-axially Oriented Film Film Packaging Protective Coverings Thin-walled Packaging
Processing Method	Bi-axially Oriented Film Coextruded Film

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	2.1	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	102		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	35.0	MPa	ASTM D638
Tensile Elongation (Yield)	12	%	ASTM D638
Flexural Modulus	1550	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	60	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	92.0	°C	ASTM D648
Vicat Softening Temperature	154	°C	ASTM D1525 ¹
Accelerated Oven Ageing (150°C)	500	hr	ASTM D3012

Note Message
1 .	Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
RTP 205 SI 2	RTP Company	Nylon 66	RTP
Sipolprene® 35180	SIPOL S.p.A	TPC-ET	Sipolprene®
Adell Polyamide BY-10	Adell Plastics, Inc.	Nylon 6	Adell Polyamide
Diakon® Frost FR10423	Lucite International Inc.	Acrylic (PMMA)	Diakon®
FERREX® GPP20CF64UL-WH	Ferro Corporation	PP Homopolymer	FERREX®