Order Products : sales@su-jiao.com
Network Polymers SBS 1003
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Network Polymers SBS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7R6xEG_Network-Polymers-SBS-1003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Network Polymers SBS 1003 is a styrene-butadiene-styrene block copolymer (SBS) product,. It can be processed by extrusion or injection molding and is available in North America. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(200°C/5.0 kg) | 7.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.65 | % | ASTM D955 |
| Water Absorption (Saturation, 23°C) | 0.070 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 seconds, 3.18mm, injection molding) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 26.2 | MPa | ASTM D638 |
| Flexural Modulus 3 | 1790 | MPa | ASTM D790B |
| Flexural Strength 4 | 37.2 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact (23°C, 3.18 mm, Total Energy) | 40.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 62.2 | °C | ASTM D648 |
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 5 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 92.0 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 177 - 232 | °C | |
| Mold Temperature | 10.0 - 48.9 | °C | |
| Back Pressure | 0.345 - 1.03 | MPa |
| Injection instructions |
|---|
| Injection Speed: 0.5 in/sec |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 51 mm/min |
| 3 . | Method I (three-point load), 1.3 mm/min |
| 4 . | Method I (three-point load), 1.3 mm/min |
| 5 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® AESN EP 076 TL | Arkema | Nylon 12 | Rilsan® |
| Purell 2410T | LyondellBasell Industries | LDPE | Purell |
| Ebalta BIV Epoxy 800 / BIV 800 | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
| JSR EPR EP21 | JSR Corporation | EPDM | JSR EPR |
| SCHULABLEND® (ASA/PA) M/MW 6201 MT | A. Schulman Europe | ASA+Nylon | SCHULABLEND® |
