Order Products : sales@su-jiao.com
OP - PSU 30GF
| Category: | PSU , Polysulfone |
| Manufacturer: | Oxford Polymers |
| Trademark: | OP - PSU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6xW1V7_OP---PSU-30GF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OP - PSU 30GF is a Polysulfone (PSU) material filled with 30% glass fiber. It is available in North America for injection molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.15 to 0.18 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 102 | MPa | |
| Break | 102 | MPa | |
| Flexural Modulus | 6210 | MPa | ASTM D790 |
| Flexural Strength | 155 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (4°C) | 75 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 188 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 182 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.3 to 121 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Drying Time, Maximum | 8.0 | hr | |
| Rear Temperature | 321 to 343 | °C | |
| Middle Temperature | 327 to 354 | °C | |
| Front Temperature | 316 to 349 | °C | |
| Processing (Melt) Temp | 332 to 349 | °C | |
| Mold Temperature | 104 to 138 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Supol HT240E | LyondellBasell Industries | PP Copolymer | Supol |
| TOTAL Polyethylene HDPE ESD 201 B | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| Bergamid™ BG6000-8035 RS HS NC001 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| EMOPLEN® HP MCF 40 | EMAS Plastik San.Tic.AS. | PP Homopolymer | EMOPLEN® |
| LNP™ LUBRICOMP™ OCL13XXP compound | SABIC Innovative Plastics Europe | PPS, Linear | LNP™ LUBRICOMP™ |
