Order Products : sales@su-jiao.com
Moldex® QS985A/M151
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Mitsubishi Chemical Corporation |
| Trademark: | Moldex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oWYngN_Moldex-QS985A-M151.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moldex® QS985A/M151 is a Polyolefin material. It is available in Asia Pacific. Primary attribute of Moldex® QS985A/M151: Crosslinkable. Typical application of Moldex® QS985A/M151: Hose/Tubing |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.870 | g/cm³ | ISO 1183 |
| Gel Content 1(120°C) | 88 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 68 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, 23°C | 2.20 | MPa | |
| Yield, 80°C | 0.500 | MPa | |
| Break, 23°C | 16.0 | MPa | |
| Break, 80°C | 1.80 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Break, 23°C | 650 | % | |
| Break, 80°C | 780 | % |
| Note Message | |
|---|---|
| 1 . | In Xylene, 20 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1400 R-5100 | RTP Company | PPSU | RTP |
| Alathon® L5876 | LyondellBasell Industries | HDPE | Alathon® |
| Elastron® G G501.A60.N.PS | Elastron USA, Inc. | SEBS | Elastron® G |
| HiFill® PP GF/M40 CC NAT | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| Politen® G2FR10 | ITEN INDUSTRIES | Polyester Alloy | Politen® |
