Order Products : sales@su-jiao.com

Eltex® HD5240EA-B

Category:	HDPE Copolymer , High Density Polyethylene Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	6mFs7U_Eltex-HD5240EA-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Eltex® HD5240EA-B is a high-density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection of caps & closures applications requiring good environmental stress cracking resistance. Thanks to high purity and excellent organoleptic properties, this grade is particularly intended for the packaging in direct contact with beverages. Typical applications Caps & closures for the packaging of still mineral water, functionalized beverages and slightly carbonated or pressurized beverages Benefits and Features Easy processing Good environmental stress cracking resistance High impact strength Low warpage Slip agent free grade Excellent, quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C duringprocessing.

Message

Eltex® HD5240EA-B is a high-density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection of caps & closures applications requiring good environmental stress cracking resistance. Thanks to high purity and excellent organoleptic properties, this grade is particularly intended for the packaging in direct contact with beverages.
Typical applications

Caps & closures for the packaging of still mineral water, functionalized beverages and slightly carbonated or pressurized beverages

Benefits and Features

Easy processing

Good environmental stress cracking resistance

High impact strength

Low warpage

Slip agent free grade

Excellent, quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C duringprocessing.

General Information
Features	Copolymer Food Contact Acceptable Good Organoleptic Properties Good Processability High ESCR (Stress Crack Resist.) High Impact Resistance High Purity Low Warpage Narrow Molecular Weight Distribution
Uses	Caps Closures
RoHS Compliance	Contact Manufacturer
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.950	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.0	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance	13.0	hr	Internal Method

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1100	MPa	ISO 527-2/1B
Tensile Stress (Yield)	25.0	MPa	ISO 527-2/1B

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength (23°C)	5.5	kJ/m²	ISO 179

Resin Grade	Manufacturer	Category	Trademark
RODRUN LC-5130G	UNITIKA Plastics Division	LCP	RODRUN
Sylvin 2810-90 Clear	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin
ALTECH® PP-H C 4940/500 MR40	ALBIS PLASTIC GmbH	PP Homopolymer	ALTECH® PP-H
Boda BDF-LB2752	Chenguang Fluoro & Silicone Elastomers Co., Ltd.	Fluorelastomer	Boda
Escorene™ Ultra LD 755 Series	ExxonMobil Chemical	EVA	Escorene™ Ultra