Osterlene® CIE-9-00

Category: PS (GPPS) , General Purpose Polystyrene
Manufacturer: Osterman & Company
Trademark: Osterlene®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 2Fo7am_Osterlene-CIE-9-00.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
CIE-9-00 is a crystal polystyrene for both injection molding and cap layer co-extrusion.

Injection molding applications such as medical and laboratory parts, tumblers and jewel boxes demonstrate the polymers ability to be molded with minimal stresses and fast cycles.

Utilizing CIE-9-00 as a cap layer in cups, plates and other consumer disposables takes advantage of this polymers melt rheology.
General Information
Features
  • Crystal
  • Fast Molding Cycle
Uses
  • Consumer Applications
  • Cups
  • Labware
  • Medical/Healthcare Applications
Agency Ratings
  • FDA 21 CFR 177.1640
Forms
  • Pellets
Processing Method
  • Coextrusion
  • Injection Molding
PhysicalNominal ValueUnitTest Method
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)9.0g/10 minASTM D1238
MechanicalNominal ValueUnitTest Method
Tensile Modulus 3030MPaASTM D638
Tensile Strength (Yield)46.2MPaASTM D638
Flexural Modulus 3100MPaASTM D790
Flexural Strength 93.1MPaASTM D790
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (0.45 MPa, Annealed)96.7°CASTM D648
Vicat Softening Temperature 101°CASTM D1525
FlammabilityNominal ValueTest Method
Flame Rating HBUL 94
Resin Grade Manufacturer Category Trademark
Spartech Polycom PP5000R B1 Spartech Polycom PP, Unspecified Spartech
TOTAL Polypropylene PPH 5060 TOTAL Refining & Chemicals PP Homopolymer TOTAL Polypropylene
Next Nylon 66 Prime Series PXH-01NC Next Polymers Ltd. Nylon 66 Next Nylon 66 Prime Series
Nipol® DN3635 Zeon Chemicals L.P. NBR Nipol®
CALIBRE™ MEGARAD™ 2081-10 Trinseo PC CALIBRE™