| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroelastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6OPVdB_3M-Dyneon-Fluoroelastomer-FG-5690Q.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| 3M™ Dyneon™ Fluoroelastomer FG 5690Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FG 5690Q should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| General Information |
|---|
| Additives Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.80 | g/cm³ | |
| State at Room Temperature | Solid |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SE-337M80 | SHIN-A T&C | Epoxy | SHIN-A |
| Sindustris PC GP1001MR | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| TEREZ PC 1007 GF 20 | TER HELL PLASTIC GMBH | PC | TEREZ PC |
| ExxonMobil™ HDPE HD 8660 Series | ExxonMobil Chemical | HDPE, UHMW | ExxonMobil™ HDPE |
| RONFALIN® ABS 1541 | A. Schulman Europe | ABS | RONFALIN® |