Order Products : sales@su-jiao.com
Purac PLA Blend C
| Category: | PLA , Polylactic Acid |
| Manufacturer: | Purac |
| Trademark: | Purac PLA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6Axn9g_Purac-PLA-Blend-C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Homo PLA: impact modified PLA blends based on monomers from Purac offer:
Blend C: to achieve an ABS type of impact resistance, blend A was impact modified. In order to minimize the drop in modulus, talc was added to this blend (see blend C in the table below). |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.25 | g/cm³ |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus | 3500 | MPa | |
| Tensile Stress | 35.0 | MPa | |
| Tensile Strain (Break) | 60 | % |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 23 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 95.0 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 to 220 | °C | |
| Mold Temperature | 70.0 to 100 | °C |
| Note Message | |
|---|---|
| 1 . | Flatwise |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PP ABS AF312C | Performance Plastics, Ltd. | ABS | PP ABS |
| Sanren F200 (1st-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| Varcum 29538 | Durez Corporation | Phenolic | Varcum |
| AXELERON™ CS K-3364 NT CPD | The Dow Chemical Company | HDPE | AXELERON™ |
| Hostacom TRC 787N E1 D71499 | LyondellBasell Industries | PP Copolymer | Hostacom |
