Order Products : sales@su-jiao.com
POLYCOMPO PE SP2520
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sgfgnh_POLYCOMPO-PE-SP2520.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYCOMPO PE SP2520 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific. Applications of POLYCOMPO PE SP2520 include agricultural, bags/liners, industrial applications and packaging. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 1.9 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 56 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 20.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 350 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 320 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 105 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 122 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu RTV KE-109A/B | Shin-Etsu Silicones of America | Silicone Rubber, RTV-2 | Shin-Etsu RTV |
| Vyncolit® RX®1-520 | Vyncolit N.V. | DAP | Vyncolit® |
| XANTAR® MX 1004 | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| Next Nylon 66 Prime Series PST-01NC | Next Polymers Ltd. | Nylon 66 | Next Nylon 66 Prime Series |
| Kumho ABS HU601 | Korea Kumho Petrochemical Co., Ltd. | ABS | Kumho ABS |
