Order Products : sales@su-jiao.com
RTP 1200 T-70A
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 5IpQi6_RTP-1200-T-70A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTP 1200 T-70A is a thermoplastic polyurethane elastomer (polyether)(TPU-polyether) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 - 1.5 | % | ASTM D955 |
| Moisture Content | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm) | 15.2 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | > 500 | % | ASTM D412 |
| Tear Strength 3 | 70.1 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 199 - 216 | °C | |
| Mold Temperature | 26.7 - 65.6 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mold, 500 mm/min |
| 2 . | Mouth die C, 500 mm/min |
| 3 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2099 X 134503 A | RTP Company | PLA | RTP |
| TORZEN® G5000HSL NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| Ultramid® A3WG10 | BASF Corporation | Nylon 66 | Ultramid® |
| Kepamid® 1325M7 | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
| OmniLon™ PA6/6 U GR33 BK1000 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
