Order Products : sales@su-jiao.com
Zythane® 3045DX
| Category: | TPU-Capro , Thermoplastic Polyurethane Elastomer (Polycaprolactone) |
| Manufacturer: | Alliance Polymers & Services |
| Trademark: | Zythane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4swnOa_Zythane-3045DX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zythane 3045DX is a polycaprolactone--based TPU with high Vicat S.P. specifically formulated for injection molding applications. It exhibits excellent low compression set, abrasion resistance and toughness and has good hydrolytic stability, oil, fuel and solvent resistance. It is supplied uncolored in pellet form. Typical Applications: Zythane 3045DX application include high temperature hydraulic seals and other applications require good higher temp compression set. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 95 | ASTM D2240 | |
| Shaw D | 52 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance | 44.0 | mg | ASTM D1044 |
| Abrasion - DIN | 38 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 16.0 | MPa | ASTM D412 |
| 300% strain | 37.0 | MPa | ASTM D412 |
| Tensile Strength (Break) | 61.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 390 | % | ASTM D412 |
| Tear Strength 1 | 160 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 8.0 | % | ASTM D395B |
| 70°C, 72 hr | 12 | % | ASTM D395B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -25.0 | °C | DSC |
| Vicat Softening Temperature | 165 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.00 mm | HB | UL 94 | |
| 1.50 mm | V-0 | UL 94 | |
| 3.00 mm | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 190 | °C | |
| Middle Temperature | 205 | °C | |
| Front Temperature | 215 | °C | |
| Nozzle Temperature | 215 - 225 | °C | |
| Processing (Melt) Temp | 215 - 225 | °C | |
| Mold Temperature | 40.0 - 70.0 | °C | |
| Back Pressure | 0.500 - 1.00 | MPa | |
| Screw Speed | 60 - 200 | rpm | |
| Clamp Tonnage | 4.0 - 7.0 | kN/cm² |
| Injection instructions |
|---|
| Injection Speed: 0.4 in/sec or more (10 mm/sec or more) |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rhelon X1003W-00 | RheTech, Inc. | Nylon 6 | Rhelon |
| SCHULAKETON GF 30 | A. Schulman Europe | PK-Aliphatic | SCHULAKETON |
| VITAMIDE® AM10BK6734 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| Cosmic DAP K66/6230F | Cosmic Plastics, Inc. | DAP | Cosmic DAP |
| POLYfill PPC GF2007 PD1 | Polykemi AB | PP Copolymer | POLYfill |
