Order Products : sales@su-jiao.com
Hytrel® G4078 NC010
| Category: | TPC-ET , THERMOPLASTIC POLYESTER ELASTOMER |
| Manufacturer: | DuPont Performance Polymers |
| Trademark: | Hytrel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4nrlcx_Hytrel-G4078-NC010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 40 Shore D Standard Performance Polyester Elastomer with Non-discoloring Stabilizer |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Part Marking Code (ISO 11469) |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1.2 | % | |
| Flow | 0.50 | % | |
| Water Absorption | |||
| 24 hr | 3.4 | % | ASTM D570 |
| 23°C, 24 hr, 2.00 mm | 6.5 | % | ISO 62 |
| Equilibrium, 23°C, 2.00 mm, 50% RH | 0.70 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 33 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 55.0 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Break | 16.0 | MPa | |
| 5.0% Strain | 2.50 | MPa | |
| 10% Strain | 4.20 | MPa | |
| 50% Strain | 8.50 | MPa | |
| Tensile Strain (Break) | 220 | % | ISO 527-2 |
| Nominal Tensile Strain at Break | 250 | % | ISO 527-2 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Transmission Rate (23°C, 85% RH) | 2000 | g/m²/24 hr | DIS 15106-1/-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength - Across Flow | 120 | kN/m | ISO 34-1 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | No Break | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature 1 | 170 | °C | ISO 11357-3 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flammability Classification (1.50 mm) | HB | IEC 60695-11-10, -20 |
| Fill Analysis | Nominal Value | Unit | |
|---|---|---|---|
| Melt Density | 1.06 | g/cm³ |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANFILL BOTTLE BY45C2 | Polykemi AB | HDPE | SCANFILL |
| Starpylen MFM43S | Eurostar Engineering Plastics | PP, Unspecified | Starpylen |
| ALTECH® PP-B B 4915/500 MR15 | ALBIS PLASTIC GmbH | PP Copolymer | ALTECH® PP-B |
| Aquivion® D98-25BS | Solvay Specialty Polymers | PFSA | Aquivion® |
| PERLER® O08U1001B10 | A.D. Compound S.p.A. | PP Copolymer | PERLER® |
