Order Products : sales@su-jiao.com
Andur 1-8 APLM
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4aFwXk_Andur-1-8-APLM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 1-8APLM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 79 to 82 Shore A is obtained when this prepolymer is cured with Curene® 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various poyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 3700 | cP | ASTM D2393 |
| 100°C | 1030 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 3.1 to 3.5%Specific Gravity, ASTM D792, 70°F: 1.19 g/mlSpecific Gravity, ASTM D792, 212°F: 1.16 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adell PP ER-17 | Adell Plastics, Inc. | PP Homopolymer | Adell PP |
| Andur M-11 (HQEE) | Anderson Development Company | PUR-Ester/MDI | Andur |
| Electrafil® J-1/CF/30/TF/13/SI/2 | Techmer Engineered Solutions | Nylon 66 | Electrafil® |
| Panlite® LN-2250Y | TEIJIN LIMITED | PC | Panlite® |
| Plaslube® HTN 05007 | Techmer Engineered Solutions | Nylon, Unspecified | Plaslube® |
