Order Products : sales@su-jiao.com
TECATRON™ GF40
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECATRON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4ON46C_TECATRON-GF40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECATRON™ PPS is a high performance thermoplastic that combines good mechanical properties with excellent thermal and chemical resistance properties. There is no known solvent that dissolves TECATRON™ PPS at temperatures below 392°F. Its low ionic impurities make it an excellent choice for applications where high purity is a concern. TECATRON™ GF40 is a glass reinforced material that offers extremely high strength along with excellent chemical resistance properties. TECATRON™ PVX is a bearing grade PPS that is suitable for high load applications. TECATRON™ PPS's excellent thermal and chemical resistance along with its ionic impurities make an excellent choice for applications requiring low outgassing and high purity. TECATRON™PPS is typically used in the automotive, electrical/ electronic, industrial, mechanical, appliance and semiconductor industries. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.64 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 0.020 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 14000 | MPa | ASTM D638 |
| Tensile Strength (Break, 23°C) | 185 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.9 | % | ASTM D638 |
| Flexural Modulus (23°C) | 13000 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 260 | °C | ASTM D648 |
| Melting Temperature | 282 | °C | ASTM D2133 |
| CLTE - Flow | 1.8E-5 | cm/cm/°C | ASTM D696 |
| Specific Heat | 1180 | J/kg/°C | |
| Thermal Conductivity | 0.25 | W/m/K | |
| Maximum Service Temperature | |||
| Intermittent | 260 | °C | |
| Long Term | 230 | °C | UL 746B |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+13 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Dielectric Constant 1(23°C, 1 MHz) | 4.00 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 23°C, 60 Hz | 1.0E-4 | ASTM D150 | |
| 23°C, 1 MHz | 4.0E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material. |
| Note Message | |
|---|---|
| 1 . | 50% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® SEP15C | BASF Leuna GmbH | Nylon 66 | Miramid® |
| GERMAMID B 6.6 GF 30 SCHWARZ | Kunststoff-Kontor-Hamburg GmbH | Nylon 66 | GERMAMID |
| HANWHA EVA 1626 | Hanwha Chemical | EVA | HANWHA EVA |
| KumhoSunny AES HW600G | Shanghai KumhoSunny Plastics Co., Ltd. | AES | KumhoSunny AES |
| LG ABS AF364 | LG Chem Ltd. | ABS | LG ABS |
