Order Products : sales@su-jiao.com
TECASINT™ 5201
| Category: | PAI , Polyamide-imide |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECASINT™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3cehuP_TECASINT-5201.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
In recent years, industry has demanded a range of materials that not only possess strength, wear properties, heat and chemical resistance but materials that are less resistive to the build-up of a static charge. Ensinger has a family of such materials; their properties are listed on the reverse side of this sheet and described below. TECASINT™ 5201 has the highest compressive strength and use temperature of the group. It is based on an Ensinger manufactured polyamide imide resin with a low sloughing, additive package. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.54 | g/cm³ | ASTM D792 |
| Water Absorption (Equilibrium) | 0.47 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | 93 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4000 | MPa | ASTM D638 |
| Tensile Strength (Break) | 84.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.0 | % | ASTM D638 |
| Flexural Strength | 134 | MPa | ASTM D790 |
| Compressive Strength | 240 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 313 | °C | |
| CLTE - Flow | 4.1E-5 | cm/cm/°C | ASTM D696 |
| Heat Deflection Temperature | 316 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+9 - 1.0E+12 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X5575 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| UNITIKA Nylon 66 ET2025 | UNITIKA Plastics Division | Nylon 66 | UNITIKA Nylon 66 |
| Eltex® Superstress™ TUB121N6000 | INEOS Olefins & Polymers Europe | HDPE Copolymer | Eltex® |
| Hifax CB228 | LyondellBasell Industries | TPO (POE) | Hifax |
| LNP™ LUBRICOMP™ RCL36 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
