Order Products : sales@su-jiao.com
SABIC® PP 680K
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3Uyd6M_SABIC-PP-680K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PP 680K is a new development grade in the blow moulding product range. Impact, transparency, stiffness are well balanced and give you the opportunity to make very nice blow moulding products. High transparency, contact clarity and gloss will produce appealing blow moulded bottles. These properties, combined with a high heat deflection temperature, result in a wide variety of applications were this material can be used. SABIC® PP 680K is used for various blow moulding processes like Extrusion Blow Moulding and Injection (Stretch) Blow Moulding. 680K applications range from household to personal care products, but the material is also very suited for food packaging where a high heat distortion could be required. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.905 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.7 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| 1% secant 1 | 1050 | MPa | ASTM D638 |
| -- | 950 | MPa | ISO 527-2/1A/1 |
| Tensile Strength | |||
| Yield 2 | 27.0 | MPa | ASTM D638 |
| Yield | 26.0 | MPa | ISO 527-2/1A/50 |
| Tensile Elongation | |||
| Yield 3 | 14 | % | ASTM D638 |
| Yield | 13 | % | ISO 527-2/1A/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 8.0 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact | |||
| 23°C | 200 | J/m | ASTM D256A |
| 23°C | 8.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 70.0 | °C | ASTM D648 |
| 0.45 MPa, not annealed 4 | 65.0 | °C | ISO 75-2/Bf |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 9.0 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | 1.0 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | testbar 80*10*4mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resiprene® 3045 | Resirene, S.A. de C.V. | TPE | Resiprene® |
| Sumikon® EME-6710SJ | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| VICOTE® F807Blk | Victrex plc | PEEK | VICOTE® |
| Buna® EP G 3473 | LANXESS Corporation | EPDM | Buna® EP |
| KRYSTALFLEX™ PE393 | Huntsman Corporation | PUR-Eth,aliphat | KRYSTALFLEX™ |
