Order Products : sales@su-jiao.com
Moplen EP300K
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1tdCoQ_MoplenEP300K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Moplen" EP300K is a low fluidity heterophasic copolymer, suitable for injection moulding applications. The product exhibits very high impact even at low temperature combined with a good stiffness. "Moplen" EP300K is typically used in houseware items and in crates. Moplen EP300K resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183, ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - Secant (23°C) | > 50.0 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, 23°C) | 27.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, 23°C) | 7.0 | % | ISO 527-2/50 |
| Flexural Modulus | |||
| -- | 1230 | MPa | ASTM D790 |
| -- | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 4.0 | kJ/m² | ISO 179/1eA |
| 0°C | 5.5 | kJ/m² | ISO 179/1eA |
| 23°C | 10 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -20°C | 90 | kJ/m² | ISO 179/1eU |
| 0°C | 130 | kJ/m² | ISO 179/1eU |
| 23°C | No Break | ISO 179/1eU | |
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 49 | J/m | ASTM D256 |
| 23°C | 98 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 100 | °C | ASTM D648 |
| 0.45 MPa, not annealed | 75.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | |||
| -- | 148 | °C | ASTM D1525 |
| -- | 150 | °C | ISO 306/A50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2000 B-390 | RTP Company | PSU Alloy | RTP |
| TEREZ PA 6 7600 FL HF | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Andur 7-AGP | Anderson Development Company | PUR-Ester/TDI | Andur |
| Capa™ 6200 | Perstorp Holding AB | PCL | Capa™ |
| Resilience™ LS21000E | PolyOne Corporation | PVC, Rigid | Resilience™ |
