Order Products : sales@su-jiao.com
Ingeo™ AW 300D
| Category: | PLA , Polylactic Acid |
| Manufacturer: | NatureWorks® LLC |
| Trademark: | Ingeo™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1n8Ds5_Ingeo-AW-300D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ingeo biopolymer AW 300D, a NatureWorks LLC product, is a thermoplastic resin derived from annually renewable resources and is specifically designed for use in injection molded food serviceware applications. This opaque, off-white molding grade creates parts that are rigid and heat resistant for tableware used with hot foods and drinks when injection molded using conventional chilled molds. Ingeo AW 300D is fully formulated to be used naturally, but may be blended with color compounds. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 27 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 - 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 2450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 33 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 50.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 107 | °C | ASTM D1525 |
| Melting Temperature | 170 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 50.0 | °C | |
| Drying Time | > 4.0 | hr | |
| Suggested Max Moisture | 0.025 | % | |
| Nozzle Temperature | 190 - 210 | °C | |
| Processing (Melt) Temp | 190 - 210 | °C | |
| Mold Temperature | 25.0 | °C | |
| Back Pressure | 0.345 - 0.689 | MPa | |
| Screw Speed | 100 - 200 | rpm |
| Injection instructions |
|---|
| Feed Throat: 20°CFeed Temp: 175-185°CCompression Section: 180-195°CMetering Section: 190-210°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Generic LDPE | Generic | LDPE | Generic |
| Geon™ Vinyl Flexible XV3784 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Escorene™ Ultra FL 00206 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| Hostacom ERC 342N C12507 | LyondellBasell Industries | PP Copolymer | Hostacom |
| CarbonResin FPU 230 | Carbon3D, Inc. | PUR, Unspecified | CarbonResin |
