Order Products : sales@su-jiao.com
Mediprene® 520350M
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Mediprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1DWqS6_Mediprene-520350M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Preliminary datasheet Mediprene® 520350: Thermoplastic Elastomer Basic material: TPS-SEBS Hardness: 35 Shore D (4 mm) Service temperature range: -50 -- +125°C (unstressed material) Colour: Translucent, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Good Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Special Features: The material is based on medically approved raw materials. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 6.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 4.00 mm) | 35 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% Secant | 6.60 | MPa | |
| 300% Secant | 8.00 | MPa | |
| Tensile Strength | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 70.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 to 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 to 230 | °C | |
| Middle Temperature | 190 to 230 | °C | |
| Front Temperature | 190 to 230 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 210 | °C | |
| Cylinder Zone 2 Temp. | 150 to 210 | °C | |
| Cylinder Zone 3 Temp. | 150 to 210 | °C | |
| Cylinder Zone 4 Temp. | 150 to 210 | °C | |
| Cylinder Zone 5 Temp. | 150 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ASTAMID™ MB3S | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| Clariant Nylon 6 6001-L | Clariant Corporation | Nylon 6 | Clariant Nylon 6 |
| 3M™ Dyneon™ Fluoroelastomer FC 2211 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
| Indothene LL 20FS020 | Reliance Industries Limited | LLDPE | Indothene LL |
| PENTAMID A GV15 MK15 H black | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
