Order Products : sales@su-jiao.com
STARFLEX® P 7027-1000
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | STAR Thermoplastic Alloys & Rubbers, Inc. |
| Trademark: | STARFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 1A5gzq_STARFLEX-P-7027-1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
STARFLEX® P 7027 Elastomer is an unfilled easy processing material designed for applications where FDA regulations are required. The material exhibits high resilience, low compression set, and good puncture resealing characteristics. It is also steam sterilizable. STARFLEX® P 7027 Elastomer is well suited for pharmaceutical closures, syringe bulbs, medical devices, and other applications where its combined rubber character, and thermoplastic nature can result in performance products at lower total cost. STARFLEX® P 7027 is supplied as ready to use translucent nibs of uniform size. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 3.0 to 3.8 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 27 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 5.86 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 900 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 182 to 193 | °C | |
| Front Temperature | 188 to 199 | °C | |
| Nozzle Temperature | 199 to 210 | °C | |
| Mold Temperature | 37.8 to 60.0 | °C | |
| Injection Pressure | 3.45 to 4.83 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.552 to 1.03 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SSZ6061 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| Wanthane® WHT-1680AB | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| Unipren® Elastomers B3 NTLA010 55A UP310 | Petropol Industry and Trade of Polymers LTDA | PP+EPDM | Unipren® Elastomers |
| Gallonprene® GP520-8502 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Abstron KU670M | Bhansali Engineering Polymers Limited | ABS | Abstron |
