Order Products : sales@su-jiao.com
LNP™ LUBRICOMP™ ML004 compound
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ LUBRICOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0XfprU_LNP-LUBRICOMP-ML004-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP LUBRICOMP ML004 is a product based on Polypropylene containing 20% PTFE. Added features of this grade include: Wear Resistant. Also known as: LNP* LUBRICOMP* Compound ML-4040 Product reorder name: ML004 |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | |||
| -- | 1.02 | g/cm³ | ISO 1183 |
| -- | 1.01 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 24 hr | 1.0 to 3.0 | % | |
| Across Flow : 24 hr | 1.0 to 3.0 | % | |
| Water Absorption | |||
| 24 hr, 50% RH | 0.020 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.010 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 1950 | MPa | ASTM D638 |
| -- | 1620 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Yield 2 | 33.0 | MPa | ASTM D638 |
| Yield | 31.0 | MPa | ISO 527-2/5 |
| Break 3 | 29.0 | MPa | ASTM D638 |
| Break | 28.0 | MPa | ISO 527-2/5 |
| Tensile Elongation 4 | ASTM D638 | ||
| Yield | 5.5 | % | |
| Break | 10 | % | |
| Flexural Modulus | |||
| 50.0 mm Span 5 | 1590 | MPa | ASTM D790 |
| -- 6 | 1590 | MPa | ISO 178 |
| Flexural Stress | 40.0 | MPa | ISO 178 |
| Coefficient of Friction | ASTM D3702 Modified | ||
| vs. Itself - Dynamic | 0.89 | ||
| vs. Itself - Static | 0.70 | ||
| Wear Factor | ASTM D3702 Modified | ||
| Ring | 13.9 | 10^-10 in^5-min/ft-lb-hr | |
| Washer | 109 | 10^-10 in^5-min/ft-lb-hr |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 27 | J/m | ASTM D256 |
| 23°C 7 | 2.5 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 420 | J/m | ASTM D4812 |
| 23°C 8 | 26 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Total Energy | 3.70 | J | ASTM D3763 |
| -- | 0.900 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 115 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 64.0 mm Span 9 | 102 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 3.20 mm | 57.0 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 64.0 mm Span 10 | 56.0 | °C | ISO 75-2/Af |
| CLTE | ASTM D696 | ||
| Flow : -30 to 30°C | 1.3E-4 | cm/cm/°C | |
| Transverse : -30 to 30°C | 1.3E-4 | cm/cm/°C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 193 to 204 | °C | |
| Middle Temperature | 216 to 227 | °C | |
| Front Temperature | 238 to 249 | °C | |
| Processing (Melt) Temp | 227 to 249 | °C | |
| Mold Temperature | 32.2 to 48.9 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | Type I, 5.0 mm/min |
| 3 . | Type I, 5.0 mm/min |
| 4 . | Type I, 5.0 mm/min |
| 5 . | 1.3 mm/min |
| 6 . | 2.0 mm/min |
| 7 . | 80*10*4 |
| 8 . | 80*10*4 |
| 9 . | 80*10*4 mm |
| 10 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIEL® 5350 | Samyang Corporation | TPEE | TRIEL® |
| Bayblend® M301 FR | Covestro - Polycarbonates | PC+ABS | Bayblend® |
| Geon™ Vinyl Rigid Extrusion L4857 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| Glastic® 1603-2D | Glastic Corporation | Polyester, TS | Glastic® |
| KOCETAL® K300BK | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
